Oil Catch Tank

I have an oil catch tank to fit.  After some thought about mounting locations, I settled for the centre of the firewall.  However, before drilling any holes, I decided that the tank needed a coat of paint to help it blend in a little better!

Here it is post spraying:

It now sits on the firewall, photo to follow.  In order to get the rivnuts to fit, I had to pack out the ECU so that the back of it isn't flush with the firewall - 5 x penny washers on each bolt did the job.  I then mounted the catch tank as high as it would go with the breather filter fitted so that there is the maximum amount of room available at the bottom to assist emptying the oil from it.